|
| The
TopSec ID Modules from MB fingerMetrica are ideally suited for battery-powered,
stand-alone fingerprint applications without need for a PC. Compatibility
with the TopSec ID Module from Siemens guarantees simple upgrade of existing
applications, but with the choice for new high-performance fingerprint
sensors from leading manufacturers. |
|
| The
TopSec ID Modules perform all basic biometric functions such as enrolment,
verification, and identification over several hundred fingerprints. The
fingerprint templates are safely stored in the module. Using a standard
microcontroller interface, any inexpensive customer controller can be used
for managing the desired application. This guarantees a cost-effective
solution with minimum development efforts. |
|
| Established
and potential applications are Access Control, Door Lock and Safe, POS
system, PDA/Mobile systems (refer to Technology Licensing: B-REAL), Personal
Access of portable system (PDA, mobile phones, Notebooks), Password of
Information Access Security (PC,Workstation, networks and machine controller),
Powerful Personal Identification (BioSCard, ID Card, Credit Card &
Smart Card), Remote control, Access systems (safe deposits, automobile
sector, locks, keys), PC-keys/PC-mouse (password replacement, boot protection,
homebanking, network access), Card readers, Defensive arms (child protection,
secure weapons, weapon saves), Time registration and Attendance systems,
Theft protection for mobile devices, car radios, notebooks, Medical devices,
Printer and Fax devices, Measuring and control equipment, Transport boxes,
Weapon saves, Alarm devices, Automotive control and many others. |
|
| The
TopSec ID Modules are compatible to our BioIDENTICA®
SDK. This way, certain operations such as enrolment can also be performed
by PC based applications. |
|
|
|
Include
sensor interface, fingerprint processing, and storage |
|
|
Board
dimensions: 20 x 25 x 4 mm³ |
|
|
CPU:
Analog Devices DSP Blackfin 536 (32 bit) |
|
|
Interfaces:
UART, RS232, Sensor |
|
|
Flash
memory: 3 MB |
|
|
Enrolment
or verification time: < 1s |
|
|
Template
comparison time: app. 1 ms |
|
|
Weight
excluding sensor and flex cables: approx. tbd g |
|
|
Operating
voltage: 3.3 - 6.5 V |
|
|
Operating
current: < 130 mA @ 5.5 V |
|
|
Quiescent
current: < tbd µA @ 5.5 V |
|
|
Operating
temperature: -20...50°C |
|
|
Storage
temperature: -40...85°C |
|
|
Humidity:
tbd RH @ 30°C |
|
|
Supported
sensors: UPEK TCS1/2, TesTech, Atmel |
|
|
Fast
power-on time: < 100ms |
|
|
Self
test capability for service and maintenance |
|
|
Hersteller:
MB fingerMetrica / Siemens |
|
|
Gewährleistung:
siehe
Hardware-Gewährleistung |
|
|
| Sensoreigenschaften (UPEK
TCS1) |
|
|
Fingerprint
sensor TouchChip® TCS1 from UPEK |
|
|
Capacitive
silicon CMOS technology |
|
|
Extremely
hard surface coating |
|
|
>
10 million touches |
|
|
Sensor
dimensions: 20.4 x 27 x 3.5 mm³ |
|
|
Active
area: 12.8 x 18.0 mm² |
|
|
Array
size: 256 x 360 pixels |
|
|
Pixel
raster: 50 µm |
|
|
Image
resolution: 508 dpi |
|
|
ESD
protection (EC 61000-4-2 Level 4): ± 15kV |
|
|
Sensor
20-pin flex cable dimensions: 46.0 x 10.5 x 0.4 mm³ |
|
|
|
|
Alle Angaben ohne Gewähr!
|
|
