Bromba Biometrics - Fingerprint Sensor Module FSMU0050

Bromba
Biometrics

Fingerprint Sensor Module FSMU0050

Home > Products > Fingerprint Modules > FSMU0050

Fingerprint Sensor Module FSMU0050

The FSMU0050 is a ready-to-install fingerprint module that conforms to the US FIPS 201 specification for Single Finger Capture Devices as related to the PIV (Personal Identity Verification) program. This product enables product manufacturers to avoid the technical details associated with the assembly and calibration of this type of device, simplifying the integration of this type of fingerprint reader into their products. For low quantities from several hundreds to several thousands, it is also the most cost-efficient solution since the electrical design already has been optimized for FIPS, CE, and ESD requirements. The modules can directly be connected to USB and then have access to a multitude of PC software solutions. For own software applications various SDKs are available, all ahead our BioIDENTICA® SDKs which even allow to mix various different sensor devices.

Additionally, the FSMU0050 which is equal to the "TCEFC1" fingerprint module from UPEK can be operated as an all-in-one stand-alone solution capable of performing all the necessary functions to capture, enrol, and compare fingerprints. The system is fully calibrated and ready for field deployment with all required external circuitry.

General Properties

Includes sensor, processor, and interface

USB 2.0 interface (Full-speed)

USB power management compliant with ACPI

Wake-up time: <15 ms

TCD50D with 32-bit 144 MIPS RISC processor

32 kB NVM available for biometric data

Module dimensions: 29 x 35 x 6 mm³

Connector similar to Molex 51441-0693.

Weight including sensor: 6.5 g

Operating voltage: 3.3 V ± 0.3 V

Operating current (fast capture): < 116 mA @ 3.3 V

Suspend mode current: 1.4 mA @ 3.3 V

Operating temperature: -20...70 °C

Storage temperature: -40...85 °C

Humidity: 5% to 93% RH @ 30°C non-condensing

PIN ESD protection (JESD22-A114-A): ± 2 kV

FIPS 201 compliant operation mode

Connector: Molex 51441-0672

Warranty: see Hardware Warranty

Sensor Properties

UPEK area sensor TouchChip® TCS1C

Superior image quality

Capacitive silicon CMOS technology

Extremely hard surface coating

> 2 million touches

Grey scale resolution: 8-bit (256 levels)

Active area: 12.8 x 18.0 mm²

Array size: 256 x 360 pixels

Pixel raster: 50 µm

Image resolution: up to 508 dpi

ESD protection (EC 61000-4-2 Level 4): ± 15 kV

Embedded Biometric Functions

Complete embedded fingerprint verification possible

Embedded UPEK template storage possible

Compatible Software

BioIDENTICA® SDK

PC logon software

Data may change without notice

Product version	Order #	Prices
Fingerprint Sensor Module TCEFC1 from UPEK	FSMU0050	Contact us
Fingerprint Sensor Module TCEFC1 from UPEK with BioIDENTICA® ALU	FSMU2050	Contact us

Last update: 2010-12-22