Bromba
Biometrics		 Bromba GmbH
Fingerprint Sensor Module FSMU0030
Search Home > Products > Fingerprint Modules > FSMU0030
Fingerprint Sensor Module FSMU0030
Magnified front side of module with sensor Magnified back side of module with processor
For PC integrators who offer their own mechanical design, our Fingerprint Sensor Modules are the perfect solution. For low quantities from several hundreds to several thousands, it is also the most cost-efficient solution since the electrical design already has been optimized for CE and ESD requirements. The modules can directly be connected to USB and then have access to a multitude of PC software solutions. For own software applications various SDKs are available, all ahead our BioIDENTICA® SDKs which even allow to mix various different sensor devices.
Additionally, the "TCEDA3" fingerprint module can be operated as an all-in-one stand-alone solution capable of performing all the necessary functions to capture, enroll, and match fingerprints. The system is fully calibrated and ready for field deployment with all required external circuitry.
General Properties
Includes sensor, processor, and interface board
USB 2.0 interface (Full-speed)
USB power management compliant with ACPI
Wake-up time: <15 ms
TCD42 32-bit / 96 MIPS RISC processor
4 kB NVM available for biometric data
Board dimensions: 20 x 20 x 4 mm³
Connector similar to Molex 51441-0693.
Weight including sensor: approx. 1.6 g
Operating voltage: 3.3 V ± 0.3 V
Operating current (active sensor): < 192 mA @ 3.6 V
Stand-by current: < 500 µA @ 3.3 V
Operating temperature: -20...70°C
Storage temperature: -40...125°C
Humidity: 5% to 93% RH @ 30°C non-condensing
PIN ESD protection (JESD22-A114-A): ± 2 kV
Factory calibrated
Manufactured by UPEK
Warranty: see Hardware Warranty
Sensor Properties
UPEK swipe sensor TouchStrip® TCS3C
Capacitive silicon CMOS technology
Extremely hard surface coating
> 10 million swipes
Sensor dimensions: 17.7 x 6.0 mm²
Active area: 12.4 x 0.2 mm²
Image size: 248 x 360 pixels
Pixel raster: 50 µm
Image resolution: 508 dpi
ESD protection (EC 61000-4-2 Level 4): ± 15 kV
Embedded Biometric Functions
Complete embedded fingerprint verification possible
Embedded fingerprint template storage possible
Embedded identification for up to approx. 12 fingers
Simple integration into many operating systems
Compatible Software
BioIDENTICA® SDK
UPEK BioAPI PC Development Kits
UPEK Linux and FreeBSD support
PC logon software on request
Data may change without notice
This product has been replaced by FSMU0040
Product version Order # Prices
Fingerprint Sensor Module with UPEK TCS3C/TCD42 sensor FSMU0030 Contact us
Fingerprint Sensor Module with UPEK TCS3C/TCD42 sensor and BioIDENTICA® ALU FSMU2030 Contact us
Last update: 2010-12-11
Security, privacy, disclaimer, copyright, impressum
Copyright 2003-2010 Bromba GmbH